An Artist\u27s Gift

Anita Burroughs-Price uses her muscial talent to provide comfort, solace and hope

Chemical and Mechanical Differences between Historic and Modern Scots Pine Wood

Timber is one of the most common historic building materials, but relatively little is known about how it ages in situ. Here we investigate historic and modern Scots pine to determine any chemical or mechanical differences between them. Fourier-transform infrared (FTIR) microscopy was used to investigate differences in the chemical composition of Scots pine (Pinus sylvestris L.) timber, comparing small samples from historic beams about 500 years old with modern timber. The hemicellulosic acetyl content was reduced by about half in the historic samples, uniformly across the thickness of the beams. A chemical mechanism was therefore suggested for the loss of acetyl groups, as has been observed in paper. In paper, deacetylation and the resulting release of acetic acid are accompanied by loss of strength. Mechanical testing of the historic timber was difficult because the available length of the samples along the grain was only 20 mm. After developing a miniaturized compression test developed for the purpose, it was shown that the relative stiffness of the historic Scots pine samples was reduced by about half compared to modern material

Size matters: variations in seagrass seed size at local scales affects seed performance

Seed size can have an impact on angiosperm reproductive fitness. Ecological theory predicts plants that will produce larger seeds in stressful environments to increase the chances of seedling survival and numerous small seeds in favourable conditions to increase the number of recruits. We measured seed morphology of the seagrass Heterozostera nigricaulis from four populations under differing environmental conditions in South East Australia. Seed size and mass among sites showed consistent differences over four flowering seasons. Seeds from exposed, ephemeral meadows (Blairgowrie, Edwards Point) were 19%–53% heavier than those from larger, stable meadows at more sheltered sites (Swan Bay, Point Henry). Overall, heavier seeds from exposed sites performed better in germination experiments and persisted (remained viable) longer compared to small seeds from sheltered sites. Seeds from sheltered sites showed contrasting levels of seed performance. Small seeds from Swan Bay had the lowest germination but the proportion of viable seeds after 12 months were much higher (41%) than similar sized seeds from Point Henry (0%). There are clear life history benefits of large seeds that facilitate seed persistence and germination at exposed sites; however, the performance of smaller seeds varied between sites and may be a function of other site-specific advantages

A dynamic model of gene expression in monocytes reveals differences in immediate/early response genes between adult and neonatal cells

Neonatal monocytes display immaturity of numerous functions compared with adult cells. Gene expression arrays provide a promising tool for elucidating mechanisms underlying neonatal immune function. We used a well-established microarray to analyze differences between LPS-stimulated human cord blood and adult monocytes to create dynamic models for interactions to elucidate observed deficiencies in neonatal immune responses. We identified 168 genes that were differentially expressed between adult and cord monocytes after 45 min incubation with LPS. Of these genes, 95% (159 of 167) were over-expressed in adult relative to cord monocytes. Differentially expressed genes could be sorted into nine groups according to their kinetics of activation. Functional modelling suggested differences between adult and cord blood in the regulation of apoptosis, a finding confirmed using annexin binding assays. We conclude that kinetic studies of gene expression reveal potentially important differences in gene expression dynamics that may provide insight into neonatal innate immunity

Listening to the parent voice to inform person-centred neonatal care.

Family integrated care (FIC), where parents are an integral part of their baby’s care and decision-making can enhance parental involvement and empowerment, contributing to decreased parental separation and stress. It follows that parents can also be a central part of neonatal education for staff in the neonatal speciality. This paper focuses on what students and staff can learn from parents about what they feel is important to make their experience better. A narrative, interpretive approach was undertaken to collect and analyse parent interview narratives. A specific question was posed to a purposive sample of parents who have had premature babies about what health professionals can learn from them. Thematic analysis revealed five key themes relating to the importance of: communicating; listening; empathising; acknowledging (the parent’s role); realising (what matters to parents). These elements were incorporated into a framework named by the mnemonic, ‘CLEAR’. This highlights what parents want staff to be cognisant of when caring for them and their babies. Learning from the parents in our care enables a greater understanding of their experiences at difficult and challenging times. Having a deeper understanding of parents’ experiences can contribute to enhanced empathic learning.Peer reviewedFinal Accepted Versio

Seed germination in a southern Australian temperate seagrass

In a series of experiments, seeds from a temperate seagrass species, Zostera nigricaulis collected in Port Phillip Bay, Victoria, Australia were exposed to a range of salinities (20 PSU pulse/no pulse, 25 PSU, 30 PSU, 35 PSU), temperatures (13 °C, 17 °C, 22 °C), burial depths (0 cm, 1 cm, 2 cm) and site specific sediment characteristics (fine, medium, coarse) to quantify their impacts on germination rate and maximum overall germination. In southern Australia the seagrass Z. nigricaulis is a common subtidal species; however, little is known about the factors that affect seed germination which is a potential limiting factor in meadow resilience to natural and anthropogenic disturbances. Overall seed germination was low (<20%) with germination decreasing to <10% when seeds were placed in the sediment. When germination of Z. nigricaulis seeds was observed, it was enhanced (greater overall germination and shorter time to germination) when seeds were exposed to a 20 PSU pulse for 24 h, maintained at salinity of 25 PSU, temperatures <13 °C, in sediments with fine or medium grain sand and buried at a depth of <1 cm. These results indicate that germination of Z. nigricaulis seeds under in situ conditions may be seasonally limited by temperatures in southern Australia. Seed germination may be further restricted by salinity as freshwater pulses reaching 20 PSU are typically only observed in Port Phillip Bay following large scale rainfall events. As a result, these populations may be particularly susceptible to disturbance with only a seasonally limited capacity for recovery

Review of Dental Impression Materials

Major advances in impression materials and their application have occurred during the last decade, with greater emphasis being placed on rubber impression materials than on dental compound, zinc oxide-eugenol, and agar and alginate. Of particular interest has been the effect of disinfection solutions on the qualities of impressions and the biocompatibility of impression materials. The principal advance in hydrocolloids has been the introduction of the agar/alginate impression technique, which has simplified the procedure and improved the quality of gypsum dies compared with those prepared in alginate impressions. The tear strength of some alginates has been improved, and some have been formulated so that the powder is dustless, thus reducing the health hazard as a result of patient inhalation of dust during the dispensing process. Polyether and silicone impression materials have been modified so that the working time, viscosity, and flexibility of the polyethers have been improved and, with the introduction of addition silicones, their accuracy has become exceptional. Although the early addition silicones liberated hydrogen after setting, thus delaying the pouring of models and dies, most addition silicones have been improved so that no hydrogen is released and dies can be poured immediately. The introduction of automatic mixing systems for addition silicones has simplified their manipulation, has reduced the number of voids in impressions, and has reduced the amount of material wasted. The incorporation of surfactants into addition silicones has made them hydrophilic, with wetting properties similar to those of polyethers, and has made pouring bubble-free gypsum dies easier. This review is confined to published and unpublished information of the past decade. It will also suggest trends that should be anticipated in the near future based on this information. The review will not present information developed before 1975, which is available in several textbooks on dental materials by Craig (1985a), Phillips (1982), and Williams and Cunningham (1979).Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/66604/2/10.1177_08959374880020012001.pd